HOWCO Warganegara Malaysia yang berminat bekerja di HOWCOdan berkelayakan dipelawa untuk memohon sekarang juga.
TEMUDUGA TERBUKA
TARIKH : 04.08.17 / Jumaat
MASA : 8.30 pg - 5.30ptg
TEMPAT: Pusat JobsMalaysia UTC Johor
Jawatan Kosong HOWCO Terkini 4 Ogos 2017 :
1.Sawyer
Reports to: Distribution 8. Warehouse Manager
Based: Malaysia
MAIN RESPONSlBlLlTIES
Follow company health & safety policies resulting in a safe, clean & controlled working environment.
Set up, operate & maintain various sizes & specs of bandsaws.
Understand the different sawing requirements of different metals, up to & including nickel alloys.
To check cut & mark materials in accordance with written work orders.
Sort materials & work orders by due dates & priority as required.
Update computer steps & schedules.
Perform general tasks ii & when required to maintain flexibility across the plant.
Adhere to company's safety policy
Conform to company safety work practices.
This list of essential duties is not exhaustive and may be supplemented as necessary
KNOWLEDGE, EXPERIENCE & SKILLS
Engineering experience preferred.
Ability to read & write, convey & understand written & verbal instructions English.
Good writing skills and Good attention to detail.
Able to work flexible hours, often at short notice. when required.
Forklift truck experience preferred.
Overhead & Jib crane experience preferred.
Some computer knowledge.
Must be able to attend interviews, training & meetings in Singapore as required.
Ability to bend, kneel. walk & stand for long periods.
Ability to lift up to 50 lbs. safely.
Ability to read tape measures & using engineering squares.
2.Heat Treatment Operator
Reports to: Heat Treatment Manager
Based: Malaysia
MAIN RESPONSIBILITIES
Operate the heat treatment furnaces and quench tanks.
Operate a rail bound charger to load / unload furnace load.
Operate computerized furnace recording software.
Willingness to learn and adapt to new philosophies of working.
Maintain material traceability.
Loading and unloading material from a charge using an overhead crane, side-loader or fork truck.
Brinell hardness testing.
Operation of a metals sawing machine.
This list of essential duties is not exhaustive and may be supplemented as necessary.
ACADEMIC/PROFESSIONAL QUALIFICATION
Higher level qualifications from a scientific / engineering background would be a bonus.
EXPERIENCE REQUIRED
Experience working in a metals heat treatment company desirable.
Forklift licence is a plus.
Brinell hardness testing qualification is a plus.
Candidates from a Metals/ Metal Material Handling background in a medium to heavy
engineering environment will be considered.
3.NDT Technician
Title: NDT Level 2 Technician
Reports to: Heat Treatment Manager
Based at: Howco Malaysia
WORKING CONTEXT
To perform in-house NDT techniques as required by the customer at all stages within the production route. To include; Ultrasonic Testing, Liquid Penetrant Inspection and Magnetic Particle Inspection.
JOB PURPOSE
NDE Inspection of material using approved NDE techniques.
MAIN RESPONSIBILITIES
NOE inspection using approved techniques & methods of NDE to defined standards, ensuring material is inspected and released with no NCR’s.
Raise NCRs in the system on defects.
Assisting the Heat Treatment Manager in any training of personnel / trainees.
Crane / fork truck license.
FACTS & FIGURES
NDE of Black, Bright Bar and Semi-Finished Products.
KNOWLEDGE, SKILLS & EXPERIENCE
ASTN and/or PCN level 2 (forgings) qualified.
Good English written and verbal communication skills.
Decision making skills.
Report writing.
Ability to read and interpret engineering drawings.
Able to read and understand NOT specifications and procedures.
Flexible and adaptable
Ability to work to tight deadlines
3rd party witness involvement
Knowledge of Oil & Gas products desirable.
4.Deep Hole Drilling Machinist
Reports to: Manufacturing Engineer
Based at: Howco Malaysia
JOB RESPONSIBILITIES
To load/ unload parts onto the machine for production
Operate Deep Hole Drilling Machine
To fabricate nickel and non-nickel parts in accordance to the requirement set in job sheet
and drawings
Conduct in process inspection and final checks on part using selected gauge
Assist in machine tools and equipment installation
Any other duties as assigned by Management
Adhere to company's safety policy
Conform to company safety work practices.
KNOWLEDGE, SKILLS & EXPERIENCE
Minimum 2 years working experience on deep hole boring machine
With working experiences in relevant industry
Able to work independently and perform shift work
Familiar with Measuring Instruments
Familiar Forklift license, overhead crane.
CNC lathe & manual lathe experience are an advantage
5.Machinist - CNC & Manual Lathe
Title: Machinist I II
Reports to: Plant Manager
Based: Malaysia
MAIN RESPONSIBILITIES
Set up, operate and maintain manual turret lathe, vertical lathe, CNC horizontal lathe and milling lathe
Conduct in process inspection and final checks on part using selected gauge
Interpret engineering drawings
Assist in machine tools and equipment installation
Any other duties as assigned by Management
Able to edit / write simple programme on NC fanuc controller (turning & milling)
Knowledge on overhead crane operation
Adhere to company’s safety policy
Conform to company safety work practices.
This list of essential duties is not exhaustive and may be supplemented as necessary
KNOWLEDGE, EXPERIENCE & SKILLS
Minimum 3 years working experience on turning / milling
Candidate must possess at least a Secondary School/SPM/"O" Level, Higher
Secondary/STPM/"A" Level/Pre-U or Professional Certificate in Engineering
(Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent
Forklift license, CNC experience are an advantage
6.Production Planner
Reports To Plant Manager
Based At: Howco Metals Management Malaysia
JOB PURPOSE
Production Planner receives drawing packages and requisitions from sales team, adds planning data, enters job sheet into the system and further prepares drawing packets for the shopfloor. This position will be the focal point in creating a production scheduling system for Howco by creating. tracking and reporting on the current production status of released materials.
JOB RESPONSIBILITIES
Track and manage daily shop workload. provide feedback to assigned Manager in-house manufacturing hours and provide regular reporting on jobs status.
Monitors, analyses and reports performance of production activities by utilizing information derived from material and production control systems.
Coordinate with the relevant supervisor in sequencing jobs.
Research and assign production times and due dates on parts during the releasing process.
Monitor production schedule, quality, service. delivery issues and take corrective actions.
Provide continual improvement on planning and reporting processes.
Participate in project milestone meetings.
Review customer requirements on the orders/drawings and take follow-up action.
Ensure confirmed orders are planned in order.
Plan production sequence and inspection requirements.
Generate Job Sheet and ensure customer requirements are met.
Productivity measurement and evaluation are carried out by tracking the efficiency, machine utilization and capability.
Generate production efficiency reports.
Update production schedule reports.
Update the re-schedule delivery date and ensure changes of schedule delivery date are reviewed.
Ensure incoming materials are correct according to quantity,size and job scope.
Monitor and control tools from tools over-stocking.
Laboratory Technician
Notify QC for incoming and final inspection.
Coordinator with sales department and monitor delivery schedule.
KNOWLEDGE, SKlLLS & EXPERIENCE
Certificate/Diploma in Precision Engineering preferred.
Experience in manufacturing process flow: sawing, machining, heat treatment and inspecfion.
Some metallurgural knowledge of 4130, 410, Inconel steels.
Excel in AutoCAD. Microsoft office (Word, Excel. Access. PowerPoint, MS Project).
Understand ISO quality plan.
Self-motivated, versatile, self-starter and possesses positive attitude.
Multi-tasking, meticulous. team player, good interpersonal and communication skills
Willing to learn new things, processes and not afraid to step out of comfort zone.
Able to multi-task and work with stress.
7.Customer Service (Handling customer account)
Title: Customer Service Executive
Reports to: Account Manager
Based: Malaysia
WORKlNG CONTEXT
Howco Metals Management Malaysia Sdn Bhd is the latest flagship plant for Howco Group,
the leading global distributor of raw material for wellhead and completion equipment to the
Oil and Gas industry. Howco Malaysia will heat treat and process high performance special
purpose metals for oil and gas exploration, extraction, production, construction, machinery
and equipment.
MAIN RESPONSIBILITIES
To manage indoor sales and to develop existing or potential accounts
Communicate with customers on enquiries, quotations and all sales related matters through to completion
To perform administrative duties and order processing
Co-ordinate with various departments to ensure commitments to customers are fulfilled
Perform inventory management
KNOWLEDGE, EXPERIENCE & SKILLS
Preferable with 2 years of relevant working experience
Sales-orientated with strong customer focus instinct and a team player
Independent and self-motivated with a strong sense of responsibility
Aggressive with good interpersonal, communications and negotiation skills
Able to multi-task and work under pressure to meet tight deadlines
Proficient in MS Office
8.Laboratory Technician
Reports to: Laboratory Supervisor
Based at: Gelang Patah, Johor Bahru.
WORKING CONTEXT
To prepare metal material for testing using machining equipment at our in-house test laboratory machine shop. This includes; CNC Turning, Sawing, Milling, Cutting, drilling, grinding and polishing.
JOB PURPOSE
Prepare incoming raw material into the appropriate dimensions and surface finish to enable a range of mechanical and metallographic testing to be performed.
MAIN RESPONSIBILITIES
Understand and interpret machining drawings and written instructions.
Operate and be competent in a variety of machining disciplines.
Accurate labelling of material at all the various stages of machining and preparation.
FACTS & FIGURES
Contribute to Laboratory on-time delivery through accurate and timely preparation of
samples for testing.
KNOWLEDGE, SKILLS & EXPERIENCE
Minimum of 3-5years experience in machining.
Good English written and verbal communication skills.
Ability to read and interpret engineering drawings.
Flexible and adaptable
Ability to work to deadlines
Knowledge of working in a Testing' environment desirable, but not essential.
Must be prepared to work in other areas of the facility as assigned.
via JobsJohor
| Jawatan Kosong HOWCO 04 Ogos 2017 |
TEMUDUGA TERBUKA
TARIKH : 04.08.17 / Jumaat
MASA : 8.30 pg - 5.30ptg
TEMPAT: Pusat JobsMalaysia UTC Johor
Jawatan Kosong HOWCO Terkini 4 Ogos 2017 :
1.Sawyer
Reports to: Distribution 8. Warehouse Manager
Based: Malaysia
MAIN RESPONSlBlLlTIES
Follow company health & safety policies resulting in a safe, clean & controlled working environment.
Set up, operate & maintain various sizes & specs of bandsaws.
Understand the different sawing requirements of different metals, up to & including nickel alloys.
To check cut & mark materials in accordance with written work orders.
Sort materials & work orders by due dates & priority as required.
Update computer steps & schedules.
Perform general tasks ii & when required to maintain flexibility across the plant.
Adhere to company's safety policy
Conform to company safety work practices.
This list of essential duties is not exhaustive and may be supplemented as necessary
KNOWLEDGE, EXPERIENCE & SKILLS
Engineering experience preferred.
Ability to read & write, convey & understand written & verbal instructions English.
Good writing skills and Good attention to detail.
Able to work flexible hours, often at short notice. when required.
Forklift truck experience preferred.
Overhead & Jib crane experience preferred.
Some computer knowledge.
Must be able to attend interviews, training & meetings in Singapore as required.
Ability to bend, kneel. walk & stand for long periods.
Ability to lift up to 50 lbs. safely.
Ability to read tape measures & using engineering squares.
2.Heat Treatment Operator
Reports to: Heat Treatment Manager
Based: Malaysia
MAIN RESPONSIBILITIES
Operate the heat treatment furnaces and quench tanks.
Operate a rail bound charger to load / unload furnace load.
Operate computerized furnace recording software.
Willingness to learn and adapt to new philosophies of working.
Maintain material traceability.
Loading and unloading material from a charge using an overhead crane, side-loader or fork truck.
Brinell hardness testing.
Operation of a metals sawing machine.
This list of essential duties is not exhaustive and may be supplemented as necessary.
ACADEMIC/PROFESSIONAL QUALIFICATION
Higher level qualifications from a scientific / engineering background would be a bonus.
EXPERIENCE REQUIRED
Experience working in a metals heat treatment company desirable.
Forklift licence is a plus.
Brinell hardness testing qualification is a plus.
Candidates from a Metals/ Metal Material Handling background in a medium to heavy
engineering environment will be considered.
3.NDT Technician
Title: NDT Level 2 Technician
Reports to: Heat Treatment Manager
Based at: Howco Malaysia
WORKING CONTEXT
To perform in-house NDT techniques as required by the customer at all stages within the production route. To include; Ultrasonic Testing, Liquid Penetrant Inspection and Magnetic Particle Inspection.
JOB PURPOSE
NDE Inspection of material using approved NDE techniques.
MAIN RESPONSIBILITIES
NOE inspection using approved techniques & methods of NDE to defined standards, ensuring material is inspected and released with no NCR’s.
Raise NCRs in the system on defects.
Assisting the Heat Treatment Manager in any training of personnel / trainees.
Crane / fork truck license.
FACTS & FIGURES
NDE of Black, Bright Bar and Semi-Finished Products.
KNOWLEDGE, SKILLS & EXPERIENCE
ASTN and/or PCN level 2 (forgings) qualified.
Good English written and verbal communication skills.
Decision making skills.
Report writing.
Ability to read and interpret engineering drawings.
Able to read and understand NOT specifications and procedures.
Flexible and adaptable
Ability to work to tight deadlines
3rd party witness involvement
Knowledge of Oil & Gas products desirable.
4.Deep Hole Drilling Machinist
Reports to: Manufacturing Engineer
Based at: Howco Malaysia
JOB RESPONSIBILITIES
To load/ unload parts onto the machine for production
Operate Deep Hole Drilling Machine
To fabricate nickel and non-nickel parts in accordance to the requirement set in job sheet
and drawings
Conduct in process inspection and final checks on part using selected gauge
Assist in machine tools and equipment installation
Any other duties as assigned by Management
Adhere to company's safety policy
Conform to company safety work practices.
KNOWLEDGE, SKILLS & EXPERIENCE
Minimum 2 years working experience on deep hole boring machine
With working experiences in relevant industry
Able to work independently and perform shift work
Familiar with Measuring Instruments
Familiar Forklift license, overhead crane.
CNC lathe & manual lathe experience are an advantage
5.Machinist - CNC & Manual Lathe
Title: Machinist I II
Reports to: Plant Manager
Based: Malaysia
MAIN RESPONSIBILITIES
Set up, operate and maintain manual turret lathe, vertical lathe, CNC horizontal lathe and milling lathe
Conduct in process inspection and final checks on part using selected gauge
Interpret engineering drawings
Assist in machine tools and equipment installation
Any other duties as assigned by Management
Able to edit / write simple programme on NC fanuc controller (turning & milling)
Knowledge on overhead crane operation
Adhere to company’s safety policy
Conform to company safety work practices.
This list of essential duties is not exhaustive and may be supplemented as necessary
KNOWLEDGE, EXPERIENCE & SKILLS
Minimum 3 years working experience on turning / milling
Candidate must possess at least a Secondary School/SPM/"O" Level, Higher
Secondary/STPM/"A" Level/Pre-U or Professional Certificate in Engineering
(Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent
Forklift license, CNC experience are an advantage
6.Production Planner
Reports To Plant Manager
Based At: Howco Metals Management Malaysia
JOB PURPOSE
Production Planner receives drawing packages and requisitions from sales team, adds planning data, enters job sheet into the system and further prepares drawing packets for the shopfloor. This position will be the focal point in creating a production scheduling system for Howco by creating. tracking and reporting on the current production status of released materials.
JOB RESPONSIBILITIES
Track and manage daily shop workload. provide feedback to assigned Manager in-house manufacturing hours and provide regular reporting on jobs status.
Monitors, analyses and reports performance of production activities by utilizing information derived from material and production control systems.
Coordinate with the relevant supervisor in sequencing jobs.
Research and assign production times and due dates on parts during the releasing process.
Monitor production schedule, quality, service. delivery issues and take corrective actions.
Provide continual improvement on planning and reporting processes.
Participate in project milestone meetings.
Review customer requirements on the orders/drawings and take follow-up action.
Ensure confirmed orders are planned in order.
Plan production sequence and inspection requirements.
Generate Job Sheet and ensure customer requirements are met.
Productivity measurement and evaluation are carried out by tracking the efficiency, machine utilization and capability.
Generate production efficiency reports.
Update production schedule reports.
Update the re-schedule delivery date and ensure changes of schedule delivery date are reviewed.
Ensure incoming materials are correct according to quantity,size and job scope.
Monitor and control tools from tools over-stocking.
Laboratory Technician
Notify QC for incoming and final inspection.
Coordinator with sales department and monitor delivery schedule.
KNOWLEDGE, SKlLLS & EXPERIENCE
Certificate/Diploma in Precision Engineering preferred.
Experience in manufacturing process flow: sawing, machining, heat treatment and inspecfion.
Some metallurgural knowledge of 4130, 410, Inconel steels.
Excel in AutoCAD. Microsoft office (Word, Excel. Access. PowerPoint, MS Project).
Understand ISO quality plan.
Self-motivated, versatile, self-starter and possesses positive attitude.
Multi-tasking, meticulous. team player, good interpersonal and communication skills
Willing to learn new things, processes and not afraid to step out of comfort zone.
Able to multi-task and work with stress.
7.Customer Service (Handling customer account)
Title: Customer Service Executive
Reports to: Account Manager
Based: Malaysia
WORKlNG CONTEXT
Howco Metals Management Malaysia Sdn Bhd is the latest flagship plant for Howco Group,
the leading global distributor of raw material for wellhead and completion equipment to the
Oil and Gas industry. Howco Malaysia will heat treat and process high performance special
purpose metals for oil and gas exploration, extraction, production, construction, machinery
and equipment.
MAIN RESPONSIBILITIES
To manage indoor sales and to develop existing or potential accounts
Communicate with customers on enquiries, quotations and all sales related matters through to completion
To perform administrative duties and order processing
Co-ordinate with various departments to ensure commitments to customers are fulfilled
Perform inventory management
KNOWLEDGE, EXPERIENCE & SKILLS
Preferable with 2 years of relevant working experience
Sales-orientated with strong customer focus instinct and a team player
Independent and self-motivated with a strong sense of responsibility
Aggressive with good interpersonal, communications and negotiation skills
Able to multi-task and work under pressure to meet tight deadlines
Proficient in MS Office
8.Laboratory Technician
Reports to: Laboratory Supervisor
Based at: Gelang Patah, Johor Bahru.
WORKING CONTEXT
To prepare metal material for testing using machining equipment at our in-house test laboratory machine shop. This includes; CNC Turning, Sawing, Milling, Cutting, drilling, grinding and polishing.
JOB PURPOSE
Prepare incoming raw material into the appropriate dimensions and surface finish to enable a range of mechanical and metallographic testing to be performed.
MAIN RESPONSIBILITIES
Understand and interpret machining drawings and written instructions.
Operate and be competent in a variety of machining disciplines.
Accurate labelling of material at all the various stages of machining and preparation.
FACTS & FIGURES
Contribute to Laboratory on-time delivery through accurate and timely preparation of
samples for testing.
KNOWLEDGE, SKILLS & EXPERIENCE
Minimum of 3-5years experience in machining.
Good English written and verbal communication skills.
Ability to read and interpret engineering drawings.
Flexible and adaptable
Ability to work to deadlines
Knowledge of working in a Testing' environment desirable, but not essential.
Must be prepared to work in other areas of the facility as assigned.
via JobsJohor
Tag :
Jawatan kosong
0 Komentar untuk "Jawatan Kosong HOWCO 04 Ogos 2017"